Solar Water Heater
Non Pressurized Solar Heater
Split Solar Water Heater
Flat Plate Solar Water Heater
Heat Pipe Solar Water Heater
Solar Heating System
Solar Hot Water System
Solar Water Heating System
Solar Collector
Vacuum Tube Solar Collector
Water Heater Accessory
Solar Vacuum Tube
Solar Water Heater Accessory
Solar Water Heater Tank
Contact Us
Tel: 0086-573-87863578
Fax: 0086-573-87866028
http://www.solar-waterheaters.com

Key Contact:
Ms. Edith Chiu
Online Inquiry
 

Flat Plate Collector
Flat Plate Collector
  • Model Number:
    JJR-01

  • Description:
    WSpecial design for Europe market . Special Anodized aluminum alloy frame to ensure handsome apperance and can accept high pressure without leakage50mm fiberglass insulation and EPDM seal strip to assure the solar collector can work under harsh and very cold temperature

    Operation Temperature -33℃～120℃

    Patterned temper glass or low iron temper glass (4mm thickness) is not easy broken with very high transmission and low emission Black chrome or Magnetic blue sputtering coating has very higher absorption rate to ensure the high efficiency.
    Description
    Specification
    Collect type
    FP3.0-A
    Dimension LXWXT
    		  
    Gross area
    2.03m2
    Aperture area
    1.84m2
    Absorber area
    1.73m2
    Total weight of empty collector
    41.6kg
    Transparent cover
    Nuber of covers
    1
    Dimension of the opening
    1970X970mm
    Cover material
    Tempered textured glass(no marking on the glass)
    Cover thickness
    4mm
    Cover transmission
    85%-87%
    absorber
    Dimension LXW
    1840X950
    Material
    Red copper
    Surface treatment
    Black chromend/blue sputtered
    Construction type
    Fin&tube(ultrasonic welding)
    Header material
    Copper T2(chinese standard)
    Header tuber size
    Φ25mmX0.8 2pcs
    Riser material
    Copper T2(chinese standard)
    Riser tuber size
    Φ10mmX0.6 8pcs
    Fill capacity
    1.8L including the header pipe
    Thermal insulation
    Insulation material
    Fibie glass Insulation(blacki backing)
    Insulation thickness
    Back 50mm
    Conductivity(w/mk)
    ≦0.048w/m.k under test tempture 70°C
    Casing
    Frame
    Aluminum alloy
    Frame colour
    Bronze
    Back plate
    Galvanised steel plate 0.21mm
    Max operation temperture
    200°C
    Maximum pressure
    1400kpa
    Sealing gasket
    EPDM
    Limitations of operation
    Max.working temperture
    120°C
    Max.working pressure
    10bar
    Max.pressure that cover can support
    1000pa
    Max.pressure allowed between fixing and case
    1000pa
    Recommended circulation flow
    Glycol/water
    Resistance to freezing
    		 Not under minus 33°C


    Learn more about products detailed description, pricing and service, Please send mail to us!